SHEEMAN0415 Posted April 25, 2015 Report Posted April 25, 2015 (edited) Hey guys i just ordered my top end kit, but im still tryin to figure out what happened to fry my one piston before i put the new ones in. One piston is shot but the other one is in good shape. I did a leak down everything is fine except the guy that had it before me put a boost bottle in for some reason and thats leaking on both sides where it goes into the manifold, would that cause alot of problems? Mods: full shearer exhaust, boyesen reed cage and reeds, (gay boost bottle) Edited April 25, 2015 by SHEEMAN0415 Quote
trickedcarbine Posted April 25, 2015 Report Posted April 25, 2015 If you did a leak down but it's leaking at the boost bottle it's not fine. Chuck the boost bottle and replace it with a stock cross over and find some new boots. That leak can roast a motor in definitely. 1 Quote
Pasi S. Posted April 25, 2015 Report Posted April 25, 2015 Remember - Do not run it, before it has passed the leak test. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.