rad95banshee Posted March 25, 2015 Report Posted March 25, 2015 So I just rebuilt my top end. Big bore kit 68mm pistons. I was running a pwk 35mm 2into1 but it seems to be starving for fuel now. I jetted up to a 202 from a 162 main made a little difference but still doesn't have that snap when you hit the throttle. What would the best setup to run on my configuration? 68mm pistons, mild port job, pro circuit pipes, vforce4 reeds. Mostly trail riding. Any advice is much appreciated! Thanks!!! Quote
Larry's Shee Posted March 25, 2015 Report Posted March 25, 2015 Uummmmm ......................................wait for it......................................................... ................................................................................................................ .................................................................................................................. two carbs?? What pipes you running? What pilot and needle? Clip? Quote
rad95banshee Posted March 25, 2015 Author Report Posted March 25, 2015 Currently running one 35mm pwk 202main 50pilot needle is two clips down from the top running pro circuit platinum 304 silencers Quote
rad95banshee Posted March 26, 2015 Author Report Posted March 26, 2015 Ok so I just dropped the main jet down to 110 and it sounds 100x better. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.