snowmobra Posted March 17, 2015 Report Posted March 17, 2015 . I want to do a 4mil crank now since my buddy blew my motor up cuz he didn't have the gas the hole way open. What I have now is stock carbs with 280 main jets and running and billet cross over intake v force4 plus 4 timing fmf FATTY 93 gas and stock head 65.45 PISTON s. I live in pa. Just want to no what I need to run a 4 mil crank. Thanks. Quote
bigweav81 Posted March 17, 2015 Report Posted March 17, 2015 4mil crank, your cylinders ported for the extra stroke...fuck a spacer plate! 4mil domes, and a cool head.and other misc. Quote
sheerider11 Posted March 17, 2015 Report Posted March 17, 2015 About 2500 bucks. Pm sleeper06. He's right in Long Island. He can get your motor all done from porting to tuning. Quote
Larry's Shee Posted March 17, 2015 Report Posted March 17, 2015 Post some pics of that side piston. Quote
Smokie the two stroke Posted March 17, 2015 Report Posted March 17, 2015 I have a almost brand new hot rods trued and welded 4 mill crank with max load bearings on it 400 shipped to your door. Sent from my iPhone using Tapatalk Quote
snowmobra Posted March 18, 2015 Author Report Posted March 18, 2015 Ok brother what u got done with or motor Quote
snowmobra Posted March 18, 2015 Author Report Posted March 18, 2015 I'll post some pictures tomorrow. So can I use my stock carbs. Or go with 28m carbs Quote
registered user Posted March 18, 2015 Report Posted March 18, 2015 stock rods are pretty flimsy. i wouldnt blame your friend to much Quote
sprinklerman Posted March 18, 2015 Report Posted March 18, 2015 stock rods are pretty flimsy. i wouldnt blame your friend to muchExplain your experience in this. (Crickets ) Guys run turbos on stock banshee crank rods . Quote
registered user Posted March 18, 2015 Report Posted March 18, 2015 stock rods are paper thin in the beam section. hence why they always break. truth be known, hotrods are pretty thin also. but ill shut up because alot of guys will probly get upset hahaha. while im thinking of it i got some brandnew 115 grey hots rods from a new crank im pulling apart if anyone wants em free. just pay shipping. trickcarbine you need some or was it just vitos you were after ? either way someone can have em, otherwise theyre goin in the trash. can have all 4 of the taiwan crank bearings also. other wise theyre goin in the trash aswell. not sure when ill get around to disassembling it but if ya want em just let me know and theyre all yours Quote
registered user Posted March 18, 2015 Report Posted March 18, 2015 i wouldnt expect you to know a good rod from a bad. if you want these lemme know. if not then go bother someone else Quote
n2otoofast4u Posted March 18, 2015 Report Posted March 18, 2015 Is RU actually windy? This guy is fucking clueless. Quote
registered user Posted March 18, 2015 Report Posted March 18, 2015 if you wanna learn somethin ya gotta pay attention grasshopper but it dont sound like your ready yet Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.