Tommygunn Posted January 19, 2015 Report Posted January 19, 2015 Anyone run them? I've seen everything from bolts to roofing screws. Trying to decide which way to go without spending a bunch of money. Quote
lil Doobie420 Posted January 19, 2015 Report Posted January 19, 2015 I do and they work great on hard packed dirt I used 5/16x1.25 bolts with washers and nylon lock nuts. They doo work and the hard ware was only 30$. Quote
sleeper06 Posted January 19, 2015 Report Posted January 19, 2015 I had a set of realtors cut up and snowmobile studded for dirt drags 300 ft also ran Cheng sheng cheapies cut up with ice screw s in them , neither were cheap are you dragging or just messing around Quote
gusto Posted January 20, 2015 Report Posted January 20, 2015 What does a trail style stud look like? Quote
Deadbeat Posted January 20, 2015 Report Posted January 20, 2015 I do and they work great on hard packed dirt I used 5/16x1.25 bolts with washers and nylon lock nuts. They doo work and the hard ware was only 30$. might want to mention the washers both sides too homie lol Quote
Tommygunn Posted January 21, 2015 Author Report Posted January 21, 2015 Running at Busco Beach in North Carolina. Ground is hard packed dirt. We mainly just go up there and drag race for fun. I have a 2ed set of tires id like to set up before this weekend. After doing a bunch of searching all over the internet, I think I'm going to run 3/8x1.5 bolts with washers. How many would you say I should run in each tire? Also is grade 8 really needed or can I get away with grade 5? I'm pretty stocked up on grade 5 bolts but I can get grade 8 at the hardware store for $45 Quote
ghott Posted January 22, 2015 Report Posted January 22, 2015 (edited) 20" Ohtsus with 24 Woodys 1.25" steel snow mobile spikes with backer plates in each work well for hard pack dirt drags. They are heavy but do the trick. No need for tubes in the tires with plates either...they seal well. Edited January 22, 2015 by ghott Quote
Deadbeat Posted January 22, 2015 Report Posted January 22, 2015 whats turning like with those are they trailable Quote
ghott Posted January 22, 2015 Report Posted January 22, 2015 ^^^^ I would not consider those tires trailable. Quote
Tommygunn Posted January 22, 2015 Author Report Posted January 22, 2015 I was told to run about 30 in each tire. I'm about to start on it. I'll post pics when I finish Quote
sleeper06 Posted January 22, 2015 Report Posted January 22, 2015 I used angle tipped carbide snomo studs , hooked up fucking amazing , the track made us put in sheet metal or equal heel guards for protection Quote
icewolf36 Posted January 23, 2015 Report Posted January 23, 2015 Ran 92 in 800ft on ice last weekend hooked really well Quote
Tommygunn Posted January 23, 2015 Author Report Posted January 23, 2015 For those running bolts, are you using tubes? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.