banshee35027 Posted October 26, 2014 Report Posted October 26, 2014 Can I ground Nology coils to something different other then head studs? Quote
#1JUANstunna Posted October 26, 2014 Report Posted October 26, 2014 Can I ground Nology coils to something different other then head studs? With a long enough piece of wire anything is possible. 1 Quote
trickedcarbine Posted October 26, 2014 Report Posted October 26, 2014 Stock coil mount..... That's how I did one. Keeps the two extra grounds up out of the way nice and easy. Another guy I know had one one a drag bike. Mounted the coil on an aluminum plate with the CDI and nitrous stuff. Right next to it was a small tab welded to the frame. He had both grounds attached there. Make sure to keep it bare metal and use dialectric grease. Quote
banshee35027 Posted October 27, 2014 Author Report Posted October 27, 2014 So where the stock coil went just bolt it on there? Quote
trickedcarbine Posted October 27, 2014 Report Posted October 27, 2014 Thread a bolt through the eyelet of each ground to each bolt hole of the coil mount. Gonna need wide head bolts or some washers. Quote
banshee35027 Posted October 27, 2014 Author Report Posted October 27, 2014 Gotcha. Thanks. So it does not HAVE TO be bolted to the head. I just want a cleaner look Quote
trickedcarbine Posted October 27, 2014 Report Posted October 27, 2014 No. Doesn't need to be the head. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.