Help with Exhaust restoration

[[email protected]]

Hello everyone ...

I'm new to the bhq and not sure if this is the right place for my thread ...if not then I'm sorry..

 

I recently bought 2nd banshee As a project and I want to start of with exhaust and was wondering if it's possible to replace the fiberglass inside the pipe with regular fiberglass insulation ?!

And is it normal to have gunk buildup inside my headers ??

[Nightmare]

Welcome to bhq. You can put that type but it won't last. You can probably find the right packing on eBay or you can try one of the site sponsors.

[Larry's Shee]

I used stainless steel pot scrubbers in my son's silencers. Will never burn out, blow out, or pack up/harden. Sounds tits too. Were 3/ $1 at dollar store.

[trickedcarbine]

^ that's probably my favorite sound. Bit louder, but sounds tits.

 

Otherwise, yes. R13 will work. Doesn't last long but sounds ok and quiets things down a bit. Shearer supposedly uses the same stuff his pipes are packed with for shipping. Owens Corning r13

[trickedcarbine]

Oh, wire wheel will clean the cores up fast!

[vrx46]

Powdercoat them a bright silver. Looks brand new

[MacRacer1]

I would just buy packing, I don't think fiberglass would last very long, it would get wet to easily.

 

 

Sent from my iPhone using Tapatalk

[sheesfast]

Oh, wire wheel will clean the cores up fast!

My favorite way to clean cores is to stand them straight up and hit them with a propane torch. They ignite and all the gunk turns to ash, that you can brush off easily.

[trickedcarbine]

That's not a shabby idea. Probably means you don't get shit every where.