landonwood20 Posted September 25, 2014 Author Report Posted September 25, 2014 Well I pulled the plug boots off grounded the plug just to see if the plug boot was the problem and what do you know bright blue spark. Taking it to the shop where the engine work was done to have put it on the dyno after new boots are installed. I will post the results when I get it back. Quote
landonwood20 Posted September 27, 2014 Author Report Posted September 27, 2014 The shop I was gonna take it to is full until monday, so I pull started the banshee and got it to run but if I let the throttle get below 1/4 throttle it would sputter and die out. Is this a jetting issue? Quote
landonwood20 Posted September 27, 2014 Author Report Posted September 27, 2014 It has pro circuit pipes, trail porting, airbox with no lid, proflow airbox plate and k&n filter. It had a 310 main jet when I pulled the carb apart and the needle is on the middle clip. Quote
landonwood20 Posted September 27, 2014 Author Report Posted September 27, 2014 (edited) I haven't checked that yet but I will when time allows. Elevation is 1300' what should the pilot be? I have kicked it over for 5 min and won't start. Edited September 27, 2014 by landonwood20 Quote
landonwood20 Posted October 9, 2014 Author Report Posted October 9, 2014 Couldnt get the thing to start last week took it to the builder turns out the fly wheel that i purchased was bad and a new flywheel and it started right up. going to pick it up today. Quote
Starwriter Posted October 10, 2014 Report Posted October 10, 2014 Let me guess. Ricky Stator or RM flywheel? OEM is the only way to go. Quote
landonwood20 Posted October 11, 2014 Author Report Posted October 11, 2014 It was one off of eBay. Runs good now just got done finishing the break in. Quote
sheerider1026 Posted October 11, 2014 Report Posted October 11, 2014 It was one off of eBay. Runs good now just got done finishing the break in. You should buy a lottery ticket. NOW! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.