Power_Man Posted September 12, 2014 Report Posted September 12, 2014 When you remove the little round yamaha cover there is nothing behind it, but yet there is a gasket on it. Why? Can you drill a the case cover to make quick access to adjust the clutch? Sent from my iPhone using Tapatalk Quote
trickedcarbine Posted September 13, 2014 Report Posted September 13, 2014 Yes, there are quite a few slick set ups where guys have modified the stock cover for easy access. Quote
trickedcarbine Posted September 13, 2014 Report Posted September 13, 2014 Here is a link I have had saved. I did the same on one of my motors many years ago. It took a few tries to get a stiff enough plexi that was stiff enough to seal up with just three screws. Masked of a circle just inside of the screws and sprayed the outside 3/8"ish ring the color of the clutch cover. Then I used that Annodize rattle can paint to put a translucent blue over the inner circle. Cleared it with gloss enamel. Actually lasted quite a while. http://www.thequadconnection.com/walkthroughs/banshee-see-thru-clutch-cover-mod/ Quote
Power_Man Posted September 13, 2014 Author Report Posted September 13, 2014 I had done a google search after I posted this and came across that thread. I don't want to go that extreme. Currently I have a billet round cover on it that has a gasket. I wondered why the stock and aftermarket ones has gasket or were even there to begin with seeing it is sealed behind it. I just want to drill a 5/8 hole or what ever size is needed to get a socket on that nut. So I guess if you can cut a big hole, a small one will be no big deal. Sent from my iPhone using Tapatalk Quote
03DMshee Posted September 13, 2014 Report Posted September 13, 2014 There was a guy on here doing that mod for I think 100 bucks with 2 day turn around... I think his name was freeyellowbanshee...look him up Quote
03DMshee Posted September 13, 2014 Report Posted September 13, 2014 http://bansheehq.com/forums/index.php?showtopic=169876&view=&hl=&fromsearch=1 Quote
Jgspahn Posted September 15, 2014 Report Posted September 15, 2014 Freeyellowbanshee did one for me and did a great job. This past weekend I did my own.. not very difficult at all.. Dremel tool is all you need, and a glass place can cut you a piece of lexan. Quote
Jgspahn Posted September 15, 2014 Report Posted September 15, 2014 I'm the member he did it for and I had some personal stuff come up and wasn't on the site for about a year. Ill sell you one sealed with clear cover and professionaly polished by mr.bling, a site sponsor.. pm me if interested Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.