Dmax7076 Posted August 23, 2014 Report Posted August 23, 2014 Stock polished 64mm cylinders need to be bored to accommodate the new pistons that come with them asking 325 shipped Quote
Dmax7076 Posted August 23, 2014 Author Report Posted August 23, 2014 Sent from my iPhone using Tapatalk Quote
2strokes4u Posted August 23, 2014 Report Posted August 23, 2014 Who ported and wat type of port Quote
Dmax7076 Posted August 23, 2014 Author Report Posted August 23, 2014 Forgot that part lol ported by Tyson racing drag port Quote
oldskool Posted August 23, 2014 Report Posted August 23, 2014 Looks like the pistons say 65.50. Do the cylinders need a bore that size to clean up? Are the cylinders at 64.00 now? Quote
Dmax7076 Posted August 23, 2014 Author Report Posted August 23, 2014 Where do you see 65.50 ???? And they do not need a bore size to clean up a hone and different pistons would be good but I have these so figured I throw these in to make a sweet deal Quote
m671054 Posted August 23, 2014 Report Posted August 23, 2014 The pistons in the pic say 65.5. Whats the actual cylinder bore size and condition? Pics of calipers measuring cylinders would help Quote
Dmax7076 Posted August 23, 2014 Author Report Posted August 23, 2014 Sent from my iPhone using Tapatalk Quote
Dmax7076 Posted August 23, 2014 Author Report Posted August 23, 2014 Thanks glad I did re measure the pistons or 64.50 Quote
Dmax7076 Posted August 23, 2014 Author Report Posted August 23, 2014 Yea my caliper is I mm off so the cylinders are 65.00 and pistons 65.50 sorry for the bad info guys Quote
m671054 Posted August 23, 2014 Report Posted August 23, 2014 (edited) Just fyi the piston part number 795m06550 means its a 795 series piston for a 65.50mm bore.also you better post some good pics showing all the knicks in the deck. I would be pissed if i bought those and that wasn't mentioned Edited August 23, 2014 by m671054 Quote
Dmax7076 Posted August 24, 2014 Author Report Posted August 24, 2014 Those are very small nicks just two and I dropped the ball didn't kno my caliper had got damaged and who ever buys them if there not happy with them I will do what it takes to make it right or simply fully refund there money it's not that hard to fix a problem long as your not a dick about it Quote
sheerider11 Posted August 24, 2014 Report Posted August 24, 2014 Sent from my iPhone using Tapatalk Not a few nicks. That's pretty significant. To get those out and get a good surface will def changed the height. Not trying to be a dick, but he's right. I wouldn't run it like that. Take some clearer pics. The more info the better. Always. Insignificant shit is always a plus too. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.