Water pump rebuild.

[banshee35027]

Can someone please show me step by step how to re build my water pump.

[Nieskes]

What needs to be rebuilt? Do you just need a new seal?

[banshee35027]

New bearing and seal. And need to know how to remove the vent aswell.

[Starwriter]

Vent block off plate. Vent on clutch cover not needed.

 

http://www.ebay.com/itm/Banshee-Clutch-Cover-Vent-Block-off-Plate-/110747369144?pt=Motors_ATV_Parts_Accessories&hash=item19c90ebeb8&vxp=mtr

[banshee35027]

I bought a clutch lockout with the glass clutch cover so I'm having to put everything back on it. But I bought it new seals and bearings for the water pump and need to know how to put it together. Also on how to install the lockout? Torque specs?

[banshee35027]

Can anyone help??

[trickedcarbine]

Pull coolant hose off clutch cover. Drain in to pan.

Pull case oil plug, drain in to pan

Pull kick starter

Remove the cover from the bike

Pull decorative Water pump Fascia

Remove actual Water pump plate

Flip cover over yank C-clip, washer, plastic gear, retainer, and pin.

Flip back over, yank pump

Use a dowel or something to blow the seal and washer out

Clean up cover and gasket surfaces on cover plate

Re install the new seal and bearing in same orientation

Slide water pump back in

Replace the retainer, pin, drive gear, clip and washer

Put gasket and cover plate on.

Install plastic fascia

New O ring on coolant tube with some grease

Now put the clutch cover on.

 

Get a clymer manual first

[banshee35027]

Awesome. Thank you!

[trickedcarbine]

Little schematic just in case.... http://www.cmsnl.com/yamaha-yfz350a-banshee-1990_model9667/partslist/A-07.html#results