bog before power

[87bansheepnw]

The cut aways should be towards the air filter side of the carb

theres 2 cut outs on the slides, one on each side

[wayne_smith97]

I mean. Look at your slides the side that faces the air filter will be cut out or arced.

[uman1030]

One side is cut away more then the other this is the airfilter side. Can also look at the syncing window. At around 3/4 throttle the small bebe on the piston (more of a small hole with an aluminum dowel pin in it) should appear in the window. If it never appears then they are reversed. Side with bebe goes to side with sync window on each carb.

[87bansheepnw]

ok well my slides were backwards. revs nice and clean now, need to take it for a test ride now to see how it rides. probally need plug caps still

[uman1030]

if the sparkplug terminal(part that wire goes to) isnt tightened down or is striped and sitting in the cap it will rattle around when you place it on the sparkplug.

[RadarRacing]

. Told ya on page one sucka. Lol. Glad its fixed.

[87bansheepnw]

. Told ya on page one sucka. Lol. Glad its fixed.

lol yeah i didint even know it wa possible thanks man