fastforworddad Posted March 12, 2014 Report Posted March 12, 2014 Time to buy tie rod ends and was thinking of going with a good quality heim joint. Found these for a YFZ 450R http://walshrc.com/shop/hardware/88405-tie-rod-end-american-tapered-left.html Need to know if the taper is the same in the banshee and 450R. Quote
fastforworddad Posted March 17, 2014 Author Report Posted March 17, 2014 Wow, no opinions or suggestions? Quote
locogato11283 Posted March 17, 2014 Report Posted March 17, 2014 I've always used Tusk tie rod ends and never had an issue. Quote
87sheerips Posted March 17, 2014 Report Posted March 17, 2014 contact stellar machine and performance, I think he stocks a lot. Quote
fastforworddad Posted March 17, 2014 Author Report Posted March 17, 2014 I've always used Tusk tie rod ends and never had an issue Do you have the 10mm or the 12mm? Quote
locogato11283 Posted March 17, 2014 Report Posted March 17, 2014 Do you have the 10mm or the 12mm? Whatever is OEM replacement. 10mm I believe. Quote
fastforworddad Posted March 17, 2014 Author Report Posted March 17, 2014 Whatever is OEM replacement. 10mm I believe. I bought the American Star 12mm kit for +2 and thought I would be done with it. Well no, all 4 ends have slop in them. Looked for the Tusk on RMATV but can't decipher if they sell the 12mm replacements or just the 10mm. I hate calling them cause they just look at the same effen webpage I'm looking at. Quote
locogato11283 Posted March 17, 2014 Report Posted March 17, 2014 OEM replacement would be 10mm. My threads are M10x1.25. Quote
fastforworddad Posted March 17, 2014 Author Report Posted March 17, 2014 yeah stock is 10mm for sure. Hopefully someone else will chime in with an idea where to get DECENT 12mm tie rod ends. I'll try Stellar, thanks JD Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.