protoolsuser81 Posted March 10, 2014 Report Posted March 10, 2014 Ok so I just purchased a 97 banshee yesterday and I noticed that the crank case has this part cut off and looks like jb weld or something in the hole. http://www.partzilla.com/parts/search/Yamaha/ATV/1997/BANSHEE+-+YFZ350J/CRANKCASE/parts.html It's the part that the #23 bolt goes into on the crank case. It's cut off and ground flat and then just sealed up, maybe I will get a picture today if needed as well. I'm wondering what exactly this is, and is it a big deal where I should start looking for another case. Seems to run fine and all that of course but i'm just a little freaked out now. Quote
BANSHEE HP Posted March 10, 2014 Report Posted March 10, 2014 theres a few #23's on that page fyi 1 Quote
BUILDER Posted March 10, 2014 Report Posted March 10, 2014 #23 are all case bolts and it is a big deal but if it is not leaking then I probably wouldnt worry about it for the moment Quote
protoolsuser81 Posted March 11, 2014 Author Report Posted March 11, 2014 It's the tab sticking up right by the number 13 on that diagram. I'm not sure if the bolt is snapped off or what the heck happened but you can see it's been cut off and is flush with the case now and doesn't stick up like in this diagram. Quote
protoolsuser81 Posted March 11, 2014 Author Report Posted March 11, 2014 Never mind after looking at the quad just now I realized that is not the part. Let me take a few pictures and try and get them uploaded for you guys to see. Quote
protoolsuser81 Posted March 11, 2014 Author Report Posted March 11, 2014 Here is some pictures of the part. https://dl.dropboxusercontent.com/u/75652258/Pics/BANSHEE%20PICS/IMAG0541.jpg https://dl.dropboxusercontent.com/u/75652258/Pics/BANSHEE%20PICS/IMAG0544.jpg https://dl.dropboxusercontent.com/u/75652258/Pics/BANSHEE%20PICS/IMAG0545.jpg Quote
sheerider11 Posted March 11, 2014 Report Posted March 11, 2014 There's not shit there. Your fine Quote
protoolsuser81 Posted March 11, 2014 Author Report Posted March 11, 2014 I'm just trying to figure out what it was and why it is ground down and has some type of putty as you can see. Can anyone take a picture of their banshee right there and show me what it was? Quote
Deadbeat Posted March 11, 2014 Report Posted March 11, 2014 its to do with the casting process you noblet 2 Quote
uman1030 Posted March 11, 2014 Report Posted March 11, 2014 sell that bike now Yes! Doesnt the oil pump usually sit there? Quote
protoolsuser81 Posted March 11, 2014 Author Report Posted March 11, 2014 Cmon guys just trying to sort out my new purchase. I feel like you're just trolling cause I don't know exactly what it is or was. Quote
satts Posted March 11, 2014 Report Posted March 11, 2014 Don't know why there would be putty there it's just solid aluminium from the cast, nothin to worry bout jus ok up banshee crankcase on ebay get pix there Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.