carburetors I need help

[onebadhemi]

how do I correctly add just my carburetors to my elevationthe guy I got it from messed around with the pilot air screw and they're all out of whack if you guys could help me ASAP that would be perfect thank you

[Starwriter]

Assuming you have stock carbs, you need main jets somewhere between 230 and 320. Pilot jets somewhere between 25 and 30. Air screw somewhere between 1/2 turn out and 2 turns out. That's the closest we can get with the information provided.

[onebadhemi]

Thanks but my elevation is at about 600ft

[tdod101]

0 - 2000 ft is roughly the same,

[bluebanshee98]

We need all your mods done to your bike to get you dialed in with the correct jetting. Can't just ask for advice without no information besides elevation

[uman1030]

Thanks but my elevation is at about 600ft

 

That's part of the puzzle but still need more. What carbs, temp you will be riding in, any mods done(pipes, porting, air filter style if stock lid on or off)? This info will help get a good estimate.

[onebadhemi]

Stock banshee with stage 4 trinity pipes and stock carbs nothing else is done

[uman1030]

Stock banshee with stage 4 trinity pipes and stock carbs nothing else is done

as in stock airbox with full lid and snorkle? Temp?

[onebadhemi]

K&N air filter no lid and like 80 degree weather

[uman1030]

probably around 27.5 pilot and 280 to 290 main. in between 1 and1.5 out on airscrews which ever gives the best crisp throttle response