lmcannon Posted February 19, 2014 Author Report Posted February 19, 2014 Solid. will see what I can do. I am waiting on a crazy order. I got part happy nd just placed order with fast and tm designworks. I think I found the reason why the bike blew in the first place. Unknown gas, 18mm domes in cool head in sea level elevation Quote
ATVridinMaNiAc Posted February 19, 2014 Report Posted February 19, 2014 Ouch. Yea that isn't good on pump gas Lol. You need like 21s or so. Sent from my MB886 using Tapatalk Quote
lmcannon Posted February 20, 2014 Author Report Posted February 20, 2014 Just got delivery today. 1 Quote
ATVridinMaNiAc Posted February 20, 2014 Report Posted February 20, 2014 Hell yea. Good start Sent from my MB886 using Tapatalk Quote
Uf21 Posted February 21, 2014 Report Posted February 21, 2014 So you are not the "ill do it later" type of person. I like you already. Quote
sheerider11 Posted February 21, 2014 Report Posted February 21, 2014 Hmm, 18s on a stock unwelded crank?? With possibly 89 pump?? Are you gonna pull the crank? Quote
lmcannon Posted March 1, 2014 Author Report Posted March 1, 2014 Got the top end back together. Didn't pull the crank. No play In bearing. Didn't want to get that deep into the motor yet. I do have a question tho. I'm rebuilding carb with all new parts and don't k I what the o-ring and 2 small screw things are. Here is a picture Quote
lmcannon Posted March 1, 2014 Author Report Posted March 1, 2014 I kno the c clip is for the needle but what is the o ring for and the o gasket and the 2 screw things in the middle of the gasket for the boul? Quote
sheerider11 Posted March 1, 2014 Report Posted March 1, 2014 One looks like the pilot, the other looks like the air jet (I think that's what it's called, don't hold me to it) that is in the bell(wide opening) of the carb. The washer goes on top the main. Not sure about the o ring on stock carbs, it's been a while since I've been through them. But it looks like the I ring for the big drain on kehien carbs Quote
Larry's Shee Posted March 1, 2014 Report Posted March 1, 2014 two screw things are pilot jets. O ring is for removeable float bowl drain, other piece, if it's brass, is main jet washer Quote
uman1030 Posted March 1, 2014 Report Posted March 1, 2014 two screw things are pilot jets. O ring is for removeable float bowl drain, other piece, if it's brass, is main jet washer longer small one is pilot(stamped 25). Shorter small one is airjet(usually stamped 1.4 or 1.6) Quote
lmcannon Posted March 2, 2014 Author Report Posted March 2, 2014 ok here is the actually parts that are left outta the moose racing kit Quote
lmcannon Posted March 2, 2014 Author Report Posted March 2, 2014 What is the thick screw one idle screw? I bought the idle kit from motion pro does that replace that. Quote
lmcannon Posted March 2, 2014 Author Report Posted March 2, 2014 How should the fuel lines/ over flow line go. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.