BansheeMan66 Posted January 24, 2014 Report Posted January 24, 2014 I recently replaced my reeds in my banshee. After that I started it once but it took forever and It hasn't started since. I checked the reeds one more time and they looked fine. Then I took the plugs out and it had spark. I don't know if it was weak. I'm new to my banshee. Maybe it could be the coil wires or the stator. I'm lost. All help is appreciated. Quote
Surfrjag Posted January 24, 2014 Report Posted January 24, 2014 Did you put vf4's in? Go up on pilot? Is the choke tube in? Cable bound up? Check everything 2x Quote
BansheeMan66 Posted January 24, 2014 Author Report Posted January 24, 2014 Did you put vf4's in? Go up on pilot? Is the choke tube in? Cable bound up? Check everything 2x they are vf2 reeds. If that's what your talking about. And choke tube is on the bike and what cable are you talking about? Quote
Surfrjag Posted January 24, 2014 Report Posted January 24, 2014 Throttle cable. check compression... Quote
BansheeMan66 Posted January 24, 2014 Author Report Posted January 24, 2014 One quick question, is it possible for the carb bowls to be switched or is there no difference between the two. Quote
hoppedupandcutdown Posted January 25, 2014 Report Posted January 25, 2014 One quick question, is it possible for the carb bowls to be switched or is there no difference between the two. The left carb has this "BB" in it for the choke circuitry (red arrow) 1 Quote
BansheeMan66 Posted January 25, 2014 Author Report Posted January 25, 2014 Thank you hoppedupandcutdown. I saw that same pic on the internet. Noticed and flipped them back. Started right up. No problems. Quote
hoppedupandcutdown Posted January 25, 2014 Report Posted January 25, 2014 Good to hear that you got it figured out, and did some research on your own. Feel free to ask anything anytime. Welcome to the BHQ. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.