Nieskes Posted January 19, 2014 Report Posted January 19, 2014 it is big bore sleeve brand new. can be bored up to 69mm but they start in the 63mm area to allow you to bore for stock pistons wich are not all the same obviusly mine are 63,75 and 63.81 will buy stock pistons and have bored to proper sizelets see some pics of these gems. Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 you teach me how to post pics and i will be all over it. been trying to upload pic of my shee makrover all week! Quote
sheerider11 Posted January 19, 2014 Report Posted January 19, 2014 Photobucket. Make an account Download pics Copy img code Paste Simple. I do it all from my phone. Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 i wont let me paste adress to upload on this site Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 URL=http://s823.photobucket.com/user/kedge82/media/BANSHEEmakeover016_zps81f9a03a.jpg.html][/url] Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 URL=http://s823.photobucket.com/user/kedge82/media/BANSHEEmakeover012_zps1c4c83fd.jpg.html][/url] Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 cool! so if i want to post my quad where do i do that at? Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 (edited) my calpers are out side and it cold out lol Edited January 19, 2014 by kedge82 Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 it gets the point across id 63.75 on one 63.81 on the other Quote
camatv Posted January 19, 2014 Report Posted January 19, 2014 well i think the real question is what are you actually trying to measure with the tape measure?? if the sleeves were never finish bore'd honed they may actually be at 63.??.. the final bore, hone would be set to the new 64.?? pistons.. Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 URL=http://s823.photobucket.com/user/kedge82/media/BANSHEEmakeover002_zps4b045176.jpg.html][/url]URL=http://s823.photobucket.com/user/kedge82/media/BANSHEEmakeover007_zpsb3fc62b9.jpg.html][/url] Quote
Nieskes Posted January 19, 2014 Report Posted January 19, 2014 well i think the real question is what are you actually trying to measure with the tape measure?? if the sleeves were never finish bore'd honed they may actually be at 63.??.. the final bore, hone would be set to the new 64.?? pistons.. looks like the sleeve. Quote
kedge82 Posted January 19, 2014 Author Report Posted January 19, 2014 im not trying to measure anything only showing the size of them because thats what they wanted to see they are supposedly able to be bored to 69 instead off 66 like the stock ones. Quote
trickedcarbine Posted January 19, 2014 Report Posted January 19, 2014 I'm digging the copper/red type color Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.