I think my CDI box is shot

[newfie22]

Last time I used my banshee it started and ran fine tried to start it today and nothing. Checked for spark first, no spark...I hate electrical problems. swapped in a new set of plugs still nothing, tried other coils that I new worked still nothing tested the stator everything was within specs, and checked all wires nothing broken. So I am guessing the CDI is bad. I don't know anyone else with a banshee so trying my CDI on another bike is not an option only way to know for sure is buy a new one. Anyone have any suggestions on a brand or other things to try? My bike is all stock. 

 

I was looking at http://www.electrosport.com/atvs/yamaha/yfz350-banshee-97-06/adjustable-cdi-yamaha-yfm350-banshee-95-06.html if anyone has ever used or know if its junk or not.

[wayne_smith97]

Where are you located

[newfie22]

Newfoundland, Canada

[wayne_smith97]

Never mind. I have an electrosport Cdi and have had no problems yet

[vulvafan537240]

Oem from here or ebay

[wayne_smith97]

I will agree with vulva oem on coils stators and cdi's. I just happen to trade for an electrosport. If I was going to buy I would buy oem.

[BB-banshee171]

Have you tested the key switch? That is if it still has one. I've had those go out before. Did you test the pick up coil?

[trickedcarbine]

Checked ground?

[newfie22]

no key switch, checked the ground and pickup coil

[sleeper06]

I have worked on 100s of bike cdi is very rarely the issue , once in 10 yrs

[newfie22]

Thanks for the replies everyone I found a local member that will let me test my cdi on his bike when he gets it out in the spring I'm gonna work ony engine rebuild untill then