locogato11283 Posted December 7, 2013 Report Share Posted December 7, 2013 LSR Sand Shark uses a Fox Float Evol on the back of it. Quote Link to comment Share on other sites More sharing options...
camatv Posted December 7, 2013 Report Share Posted December 7, 2013 only single arm chassis i ever rode that i actually felt safe on was my lsr. ALL the others i have tried have twitched or jerked when they get unloaded. for some reason that was "acceptable" bullshit! but my damn lsr rides like a brick. i really love my dual arm setup with floats on it. nice and comfy Quote Link to comment Share on other sites More sharing options...
m671054 Posted December 8, 2013 Report Share Posted December 8, 2013 Any one have the od measurement on the lower shaft to compare to a marvin? also on the float3 is the lower black part near the mount removable. couldnt locate good spec online. Quote Link to comment Share on other sites More sharing options...
Nightmare Posted December 9, 2013 Report Share Posted December 9, 2013 I love my floats. They never leave the ground. I want to get another set of fox shocks. I'll run them in anything. I can't see why a drag guy wouldn't run them Probably because we rather put $1400 bucks somewhere else besides suspension Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted December 9, 2013 Report Share Posted December 9, 2013 Probably because we rather put $1400 bucks somewhere else besides suspension I've seen the basic single tube floats pop up for 250-350. A lot cheaper then shaws Quote Link to comment Share on other sites More sharing options...
Boston Posted December 9, 2013 Report Share Posted December 9, 2013 only single arm chassis i ever rode that i actually felt safe on was my lsr. ALL the others i have tried have twitched or jerked when they get unloaded. for some reason that was "acceptable" bullshit! but my damn lsr rides like a brick. i really love my dual arm setup with floats on it. nice and comfy Post up a pic of your bike with floats? Does anyone know the weight difference? Quote Link to comment Share on other sites More sharing options...
10milmike Posted December 9, 2013 Report Share Posted December 9, 2013 I have never seen foxs used for 250 to 350. The cheapest I seen used foxs is $500. Yes new they are close to $700. Sent from my Samsung Galaxy note 3 Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 9, 2013 Report Share Posted December 9, 2013 I can weigh one of my Fox Evols if anyone wants to do a weight comparison. I believe it's about 4.5 pounds. My brother's bike has the Float X and they are lighter than my Evols. Quote Link to comment Share on other sites More sharing options...
sheerider11 Posted December 9, 2013 Report Share Posted December 9, 2013 Quote Link to comment Share on other sites More sharing options...
Boston Posted December 9, 2013 Report Share Posted December 9, 2013 Anyone have a shaw handy? Let us know the length as well. Quote Link to comment Share on other sites More sharing options...
10milmike Posted December 9, 2013 Report Share Posted December 9, 2013 That is current bid. Not what they sold for. $178.50 for foxs is a joke. Sent from my Samsung Galaxy note 3 Quote Link to comment Share on other sites More sharing options...
dozer Posted December 9, 2013 Report Share Posted December 9, 2013 That is current bid. Not what they sold for. $178.50 for foxs is a joke. Sent from my Samsung Galaxy note 3 those are probably some 16" to 18" length shocks also, not exactly banshee length. 1 Quote Link to comment Share on other sites More sharing options...
locogato11283 Posted December 9, 2013 Report Share Posted December 9, 2013 those are probably some 16" to 18" length shocks also, not exactly banshee length. Those don't look that long.. I think mine are 17.5" eye to eye.. Quote Link to comment Share on other sites More sharing options...
m671054 Posted December 9, 2013 Report Share Posted December 9, 2013 Any one have the od measurement on the lower shaft to compare to a marvin? also on the float3 is the lower black part near the mount removable. couldnt locate good spec online.someone who owns thes please provide a lower body od measurement. i would like to use them but want to know if i need custom spindles or what. Quote Link to comment Share on other sites More sharing options...
shanYE west Posted December 9, 2013 Report Share Posted December 9, 2013 I'll get a OD tonite, The shaft is quite a bit bigger then the shaft on a shaw. I paid 250.00 for my floats used.. I've passed on more then a few sets for 350.00. here they are on my ziggy. I never weighed them vs my shaws.. The weight difference wasn't a big deal to me. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.