Justintoxicated Posted December 2, 2013 Report Posted December 2, 2013 Ok so I think I have gone through like 20 of these things now. I can't find any way around it. My CPI pipes fit like shit. Whats the solution? New pipes? I need something high quality that will add some mid-range or at least deliver smooth power from a 421 CUB. Quote
sprinklerman Posted December 2, 2013 Report Posted December 2, 2013 Are your pods angled? And what intakes are you using? Quote
dave5.0 Posted December 2, 2013 Report Posted December 2, 2013 And what intakes are you using? First thing I'd look at. Are you running reed spacers? Quote
Justintoxicated Posted December 2, 2013 Author Report Posted December 2, 2013 (edited) Yea they are angled pods. No matter how I angle them the filter will hit right near the carburetor. Intakes are billet with no cross vent, not sure on the make. It's the left one that hits, the right barley clears but haven't melted it yet. Edited December 2, 2013 by Justintoxicated Quote
dave5.0 Posted December 2, 2013 Report Posted December 2, 2013 Are your stingers on the wrong sides? Yes it can happen! I was thinkin that. But was gonna wait for you. Quote
Justintoxicated Posted December 3, 2013 Author Report Posted December 3, 2013 (edited) hmm backwards stingers... I don't think so but I will look into that. I guess Just remove them, then flip the silencers end the other way? I also have this issue. Another Picture, although this side seems to clear once I add rubber bands. Edited December 3, 2013 by Justintoxicated Quote
Justintoxicated Posted December 3, 2013 Author Report Posted December 3, 2013 First thing I'd look at. Are you running reed spacers? No Spacers Quote
WINDYCITYJOHN400 Posted December 3, 2013 Report Posted December 3, 2013 X2 Time for some UPP intakes. Quote
Banshee Chad Posted December 3, 2013 Report Posted December 3, 2013 Weird.. I have plenty if space and I run an air box.. I'm betting on stinger tubes wrong side Quote
5150banshee Posted December 3, 2013 Report Posted December 3, 2013 I run chariot intakes and no reed spacers and my shearers clear everything they fit really nice. The intakes also made my 39's clear the clutch. Sent using Iphone5 onTapatalk Quote
jbooker82 Posted December 3, 2013 Report Posted December 3, 2013 Boss one piece intake, and 10 deg angled pods. CPI pipes with a Cascade heat wrap on the LH side. I have plenty of room on the RH side. Quote
rubberneck Posted December 3, 2013 Report Posted December 3, 2013 I run cascade heat wraps as well with my cpi. I have white knuckle intakes and angled pods, but without the nasa wraps its a melted outerwear. Quote
possum Posted December 3, 2013 Report Posted December 3, 2013 out of 4 sets of shearers I put on bikes they NEVER hit the outerwears. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.