Anyone have history / experience with racers edge OOFs

[#1JUANstunna]

I picked up all of the left over original stamps from Racers Edge which is now known as Dasa Racing.Stamps( two pieces ,top and bottom stamped out of .040 guage sheet metal on a 1 plane surface IE : flat from cylinder to stinger ) They then get welded together, then cut and twisted to mount on a Banshee. Flanges and stingers welded on as well as mounts and spring tabs.

I'd like to see that done. Sounds pretty cool.

[Empire Industries]

Top And Bottom Racers edge  Stamps

[troyzstang]

So is it safe to assume that you are the same person that I spoke to last month? If so thanks again for your help identifying what I have.

Also curious what a new set would cost? ( Small Bore / chrome)

 

 

Troy

[fappy'97]

Those out of right pipes look great!

[RobertR]

Could these be made into a in frame set???

[Empire Industries]

Could these be made into a in frame set???

Got a sawzall and a welder ? lol

[Empire Industries]

They are $375 raw. I will have to check into a price on chrome.

[Sandking]

What's you address and are you offering parts or just service. I'm local and don't like going to Trinity.

[camatv]

if your building these with much better mounts that would be great.  the biggest problem i have with mine is the junky ass mount setup..  

 

IF you have a PV setup  these pipes really scream.  for 375 hell most track guys/ draggers should just grab up a set and try them..

 

also  i take it you just have a set number of them?  not a set of original die's?   

[Empire Industries]

Ya I only have what's left over from the last run. If there was enough demand I could look into getting more made.

[banshee760]

Ya I only have what's left over from the last run. If there was enough demand I could look into getting more made.

Just wondering because I haven't seen yet or heard mention any one saying if they or you make big bore racers edge pipes ? All I seem to hear is about the small bore version , and do you sell them ?

[Empire Industries]

There is a big bore flange 1.900 I.D. for these pipes However they are the same pipe and stamps, just bigger flanges. They will work good on everything up to 550 CC Personally anything bigger than that I would opt for a set of shearer big bores or some hand coned pipes set up for your motor.

[Empire Industries]

Sorry I missed this post. I am in Riverside close to the 91 and Van Buren. I do service,repair,porting ,performance, parts and custom builds. Let me know how I can help. Email is the best way to get through to me. My Email is [email protected] Thanks, Eric

[camatv]

looks like you should keep running them through ebay.  nice results!

[trickedcarbine]

Bump for interesting.