1-2" Longer Kicker?

[Starwriter]

They're around for a lot cheaper than that. I sold one for locally for $20. Here's 1 for $15. As mentioned, you could cut 1 and add a piece. Just cleaner and easier to use 2 kickers.

 

http://bansheehq.com/forums/index.php?showtopic=169409

[possum]

put a magnet on it.

[rubberneck]

MG600 welding rod

[Strm Trpr]

I put up a WTB ad.

I'm going to go the welding route.

[rubberneck]

http://www.messerwelding.com/Product%20PDFs/by%20part/MG%20600.pdf#page=1&zoom=auto,0,800

 

Anytime i have a steel that i dont really know exactly what it is, i use this stuff.  Go to your local welding supply place and ask about it.  I have had great luck with this stuff.  You can get it stick or tig. I have mostly used it TIG but have used the stick stuff a couple times to extract bolts broken off down inside a hole.

[NYUK]

better heat the cast kicker up cherry red before you try to weld it.

[rubberneck]

If its cast steel, the above welding rod will weld it without preheating.  If it was cast iron you should use MG200.  However i dont think its cast iron.  I dont have my bike here to throw a magnet on it to find out

[chevota84]

Aren't some of the billet ones longer?

 

Sent from my DROID RAZR HD using Xparent BlueTapatalk 2

 

 

[NYUK]

rz kicker is longer.

[Strm Trpr]

Thanks for the tip rubberneck.

I really don't think it's cast iron it has to be die forged or something.

http://www.prosna.com/die-forging-process.html

Where you at in central ca?

[rubberneck]

im near modesto

[banshee#44]

Wait so raptor ims pegs fit on a banshee

[Strm Trpr]

im near modesto

no shit, I'm in Stockton.

You feel like conducting an experiment?

[Strm Trpr]

Wait so raptor ims pegs fit on a banshee

Yes, Raptor 660 pegs do fit.

You just need a small round 1/2" tall spacer for the brake pedal side and a 1/2" longer screw.

[rg97]

rz kicker is longer.

True, but i'd say its too long. just quickly snapped a pic from my RZ and my shee, and its a big difference...

 

RZ350

 

 

Banshee