jinx44 Posted July 31, 2013 Report Share Posted July 31, 2013 I haven't owned a banshee for a few years, but I had several back when I was into riding. I have sold all the bigger parts that I had, but I still have a few small things that I need to get out of my way. Though I will be checking this thread and updating it as things sell, the quickest way to contact me is via email at jinx44@gmail.com. All prices INCLUDE postal shipping and paypal fees. With that being said, the parts are cheap and USPS and paypal will be making far more money that I am. Unless you are buying multiple parts where I can ship them together, prices are firm. .076" spacer plate for 4mm stroker: $15 Front lowering kit: $15 3/4" thick Pro-flo reed spacers: $10 3/8" thick Pro-flo reed spacers: $10 Stock reed cages (3): $10 Stock intake boots (2 modified, 2 stock): $10 Stock throttle covers (3): $10 White Brothers parking brake block off plate: $10 Twist throttle: $10 Aluminum tie rods with chrome tie rod ends: $30 Locking axle nut: $10 A-arm bushing kit: $10 Brake hub for drag axle: $15 Custom domes from Noss Machine for Pro-Design or Noss heads. These have the normal angled squish, but flat dome. David Noss and I tried several different dome shapes back around '01-02 and this is a set he built and I never had the chance to try. They are 18cc. $15 Stock air box with Pro-Flo plate, K&N filter, and Outerwear: $30 Stock swingarm shortened 2": $50 AC Racing grab bar: $25 Stock Radiator: $25 Quote Link to comment Share on other sites More sharing options...
BlksnshN Posted July 31, 2013 Report Share Posted July 31, 2013 Are those domes for a 4 mil? Quote Link to comment Share on other sites More sharing options...
miami350 Posted July 31, 2013 Report Share Posted July 31, 2013 how the tie rod and strips??? Quote Link to comment Share on other sites More sharing options...
Young Guns Racing Posted July 31, 2013 Report Share Posted July 31, 2013 Email sent on grab bar and lowering kit Quote Link to comment Share on other sites More sharing options...
jinx44 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Are those domes for a 4 mil? Domes are not recessed, if that is what you are asking. They are set up for zero deck. I was going to use them on a 4mm that used a spacer plate. Quote Link to comment Share on other sites More sharing options...
jinx44 Posted July 31, 2013 Author Report Share Posted July 31, 2013 how the tie rod and strips??? You lost me... Quote Link to comment Share on other sites More sharing options...
heavyhitter Posted July 31, 2013 Report Share Posted July 31, 2013 email sent ... airbox, intakes and reeds Quote Link to comment Share on other sites More sharing options...
jinx44 Posted July 31, 2013 Author Report Share Posted July 31, 2013 Lots of parts are spoken for so far. No one has been interested in the same parts yet. List of items pending: Reed cages, intakes, airbox, lowering kit, grab bar, spacer plate, bushing kit, brake block off plate, and spacer plate. The guys that have emailed/pmed me about these items have first chance. Quote Link to comment Share on other sites More sharing options...
possum Posted July 31, 2013 Report Share Posted July 31, 2013 flat roof domes ftw.. Quote Link to comment Share on other sites More sharing options...
possum Posted July 31, 2013 Report Share Posted July 31, 2013 Are those domes for a 4 mil? if you know your deck height. "changes with whatever base gasket your running". then ask what the step is on those domes.. then you know if they will work or not. Bam. Quote Link to comment Share on other sites More sharing options...
jinx44 Posted August 1, 2013 Author Report Share Posted August 1, 2013 flat roof domes ftw.. I have another one here that is an inverted design, like a funnel. I was only 20-21 back then and didn't have as good of a grasp on how engines operate, but looking back I can see why this funnel style didn't work due to the flame speed. I couldn't give it much timing at all (I was running a Dynatek and was able to easily adjust my curve). It was detonating so badly it would rattle the spark plugs loose no matter how tight you had them. lol if you know your deck height. "changes with whatever base gasket your running". then ask what the step is on those domes.. then you know if they will work or not. Bam. .030" Quote Link to comment Share on other sites More sharing options...
jinx44 Posted August 1, 2013 Author Report Share Posted August 1, 2013 (edited) Items that have been paid and shipped: Lowering kit, grab bar, airbox, reed cages, intake boots, bushing kit, and brake block off plate. Items that are pending payment: Tie rods/ends and spacer plate. I found a couple more things: Pair of 10x5 front wheels with reinforcing rings. $75 Custom billet aluminum brackets that go in place of the headlights and allow you to mount an Autometer gauge pod facing the rider. VERY cool setup for someone needing a fuel pressure gauge or nitrous bottle pressure gauge. $20 Bearing carriers (all 3 styles that came on banshees). All still have bearings that are intact, and spacer tube. I would plan to replace the bearings. $20 each. Rear hub with one stud missing. $15 Rear shock. Was working great when removed several years ago. $30 Edited August 1, 2013 by jinx44 Quote Link to comment Share on other sites More sharing options...
Pastrykiller Posted August 1, 2013 Report Share Posted August 1, 2013 You would be out if your mind to sell that boost bottle. That thing is the best Hp gaining mod ever sold. Buy a boost roost and add the boost bottle and you are set for success. Seriously, Thanks for the parts. Quote Link to comment Share on other sites More sharing options...
jinx44 Posted August 2, 2013 Author Report Share Posted August 2, 2013 (edited) You would be out if your mind to sell that boost bottle. That thing is the best Hp gaining mod ever sold. Buy a boost roost and add the boost bottle and you are set for success. Seriously, Thanks for the parts. I actually have a Roost Boost in my tool box that I pulled off a Tri-Z many years ago! lol I just noticed I didn't even mention or price the boost bottle. lol I will throw it in someones box if they want it. And I appreciate you buying them. Follow up with me when you get them. Thanks! Edited August 2, 2013 by jinx44 Quote Link to comment Share on other sites More sharing options...
jinx44 Posted August 6, 2013 Author Report Share Posted August 6, 2013 I just came across a Moose replacement brake lever that is new in the package. The package is beat from getting moved around and thrown in parts bins. I will package deal it with any of the above parts. The 3/4" reed spacers would be easy to tap and install a couple nitrous nozzles... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.