Surfrjag Posted July 18, 2013 Report Posted July 18, 2013 all good mysteries need clues... do a compression test! 1st clue is free Quote
BUILDER Posted July 18, 2013 Report Posted July 18, 2013 When your banshee no longer does 120mph then it is blown up Quote
toytech Posted July 18, 2013 Report Posted July 18, 2013 When your banshee no longer does 120mph then it is blown up uh oh mine was blown up when I built it then. still runs 2 yrs later though. Quote
tdod101 Posted July 18, 2013 Report Posted July 18, 2013 From my experience it will do one of three things: 1) not start at all 2)one cylinder will fire 3) one cylinder will fire no matter how many times you put new plugs in. Quote
Nightmare Posted July 19, 2013 Report Posted July 19, 2013 Take it apart FFS! Sent from my SGH-T679 using Tapatalk 2 Quote
Starwriter Posted July 19, 2013 Report Posted July 19, 2013 Do a compression test and a leakdown test before you pull it apart. Quote
Nieskes Posted July 19, 2013 Report Posted July 19, 2013 These guys are ass holes, dont listen to them. What you do is turn your banchee upside down, take the plug out of them bottom and fill the motor up with 150psi. After you do that lay under the seat while the banchee is still up side down and kick it over 5 times. After that is done flip the bike back over and let the air out of the case, pull your spark plugs out and kick it over 8 times. Then put the plugs in and see if it starts. If not, its blown the fuck up. Quote
Nieskes Posted July 19, 2013 Report Posted July 19, 2013 ffs ??? Fat Finger Steven, he is a mod on the fourm. Quote
Deadbeat Posted July 19, 2013 Report Posted July 19, 2013 at least while not running, your banshee widening kit wont kill you Quote
mike0chek Posted July 19, 2013 Report Posted July 19, 2013 If it looks like this or this haha thats my crank carnage Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.