BANSHEEBEEFM2M Posted June 28, 2013 Report Posted June 28, 2013 Going to be running a 350 with a full out drag port, would these pistons be good for me? would i still be getting the supposed +8 HP from them? Quote
Colby Posted June 28, 2013 Report Posted June 28, 2013 Going to be running a 350 with a full out drag port, would these pistons be good for me? would i still be getting the supposed +8 HP from them? no ... go with wiseco's .. those pistons "simulate" porting , so with a drag port on the cylinders, timings will be off with those pistons .. 1 Quote
Jereme6655 Posted June 28, 2013 Report Posted June 28, 2013 Colby is right.....you'd be all over the board with your timings and it wouldn't want to run right. Quote
Pastrykiller Posted June 28, 2013 Report Posted June 28, 2013 It will run with the super stock pistons even if you have an exhaust port that is lower that 28mm. Your drag port will prob end up around 26mm. With this being said, it will be extremely peaky. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.