toytech Posted June 28, 2013 Report Posted June 28, 2013 pm racetech and see if he ill sell you a pickup coil. or just buy one of his stators. Quote
kedge82 Posted June 28, 2013 Report Posted June 28, 2013 your machine is grounded through the exaust chrck them first then try putting spark plug in the boot and reaching it to the frame itself while some one kicks it over. if know spark there your stator is more then likley not grounded propperly or the wire is missed up. another thing you can do is check for continuity through plug wires to ignition coil and there is also a way totest the coil back to the stator. but i dont have my book with me and dont know right off hand Quote
jredsbanshee91 Posted June 28, 2013 Author Report Posted June 28, 2013 ok will do and i checked for continuity thru all the wires everything seems fine ieven checked the voltage from the stator and its fine all the grounds r good as far as i can tell and the coil is good also it was bench tested power is getting to the cdi but something is keeping the cdi from sending to the coil and idk wut it is and idk how to check if the coil is getting any power wen u kick it over. Quote
jredsbanshee91 Posted June 29, 2013 Author Report Posted June 29, 2013 neone else have ne ideas? if so plz respond ive bealin with this for 2 weeks now should i try puttin my stock stator back on(it still ohms good and didnt get ne damage) and just put a new pick up coil on it and try that? Quote
Junkyshee Posted June 29, 2013 Report Posted June 29, 2013 I've been there buddy, mine sit for 9 years and I dug it out few months ago couldn't get it to fire, changed everything and finally changed wiring harness and fired right up. Quote
jredsbanshee91 Posted June 29, 2013 Author Report Posted June 29, 2013 ya thats sux neone else? all these members with tons of expeirence dont wanna help a fellow banshee owner out? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.