aztwin350 Posted June 13, 2013 Report Posted June 13, 2013 just wondering what head is on my banshee. the guy i bought it from said it had a stage 3 head. looking at it today it actually says stage iv on it. its a polished head but couldnt see a name on it. when i was riding it today it seemed to break up a lil on the top end. was seeing where my jetting should be. it has the head full fmf pipes and 2 foam filters with no airbox. am going to pull the carbs off tonight and see what jets are in it. Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 the shee came from by flagstaff az which is quite a bit higher in elevation than kingman where i live. thats why i feel like the mains might be off. it starts fine and mid range seems good. just at the higher rpms it starts to break up Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 quad came from 6000 feet i live at 3300 Quote
JUSTWANNARACE Posted June 13, 2013 Report Posted June 13, 2013 Its a trinity head. If u have stock needles id say 27.5-30 pilot 310-320 main clip in the middle on the needle and 1.5 turn out on the air screw... jmo Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 Its a trinity head. If u have stock needles id say 27.5-30 pilot 310-320 main clip in the middle on the needle and 1.5 turn out on the air screw... jmo well i heard those are good heads. im getting ready to pull the carbs off here in a lil bit and see what we got. any idea roughly the hp numbers would be. it definately gets it better than my lt250r but seems like theres room for improvement. Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 do i need to run higher octane fuel with those heads. i usually run 91 in my other quad. Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 What cc domes not sure guy didnt even know what heads were on it. he got it in on a trade and said he liked 4 strokes more. is there any way to find out without taking it apart Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 Must be a special edition. the heads say stage iv on them. another person said trinity . Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 heads? im not sure what your asking. the heads say stage 4 on them. ok so ipulled of one carb and its got a 380 main in it. would too much gas make it stumble as well Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 i think its got vforce reeds as well since hr gave me extras. it just said replacement not v force 2 or 3. sorry if my info is kinda vauge Quote
aztwin350 Posted June 13, 2013 Author Report Posted June 13, 2013 does 380 main sound way too rich? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.