justinklumb29 Posted October 30, 2003 Report Posted October 30, 2003 Iam planning on getting a new crank over the winter and was wondering what one is the strongest, most reliable, and can make the most power(if they make power, or can handle the most power) I currently got fmf fattys, boysen power reeds, and after the cranks i plan on getting it ported. Thanks Quote
bignasty1 Posted October 31, 2003 Report Posted October 31, 2003 i got a vito's crank and i like it nothin wrong with it its quiet compared to my old stocker... why are ya gettin new? Quote
fixitrod Posted October 31, 2003 Report Posted October 31, 2003 Well, most cranks are good, but if you want a performance one Andy at grand river racing can put together a nice one. He can add 10 ball bearings to the one you have and put a needle bearing on the pto side. I believe some others build them that way too. A little $$$, but may be worth it. I just spun a 7 ball bearing after 3 years. I don't think it should have done that. It's a wiseco hot rod crank. Quote
MULLET~BOY Posted October 31, 2003 Report Posted October 31, 2003 the vitos is the same as the wisco one they all say hotrods crank when you get it Quote
PassionRE Posted October 31, 2003 Report Posted October 31, 2003 If you want a reliable, not too expensive, and all out explosive horsepower situation, by all means go with the +4 long rod Wiseco and have it ported specifically for that crank...it will just blow your mind...Jim Quote
fixitrod Posted October 31, 2003 Report Posted October 31, 2003 You can get the 4mm long rod from moto sport outlet for 500. Quote
Blue Duece Posted October 31, 2003 Report Posted October 31, 2003 If you want a reliable, not too expensive, and all out explosive horsepower situation, by all means go with the +4 long rod Wiseco and have it ported specifically for that crank...it will just blow your mind...Jim Jim, thats the crank going in my motor isnt it?.....can you take some pics of my build? id like to see your 12 port design, before you button it up....... Quote
MRMOONEY Posted October 31, 2003 Report Posted October 31, 2003 watch ebay, i got a 4mm long rod crank on ebay from inland atv that came trued and welded for 460 bucks cheap as heLL Quote
Stomp77 Posted November 1, 2003 Report Posted November 1, 2003 www.bansheesuperstore.com check em' out. TDR (tony doukas racing) i got a High performance ten ball bearing main, trued and welded, fully rebuildable inner webs and hot rods connecting rods crankshaft with THE WORKS for tatatatatat (drum roll) for 350.00 bucks out the door, Best price going for the best stuff around it can handle anyting you throw at it Quote
chase73 Posted November 6, 2003 Report Posted November 6, 2003 Hey stomp yeah you got that crank from TDR for 350 but , its a rebuilt crank not new and it is not a stroker crank he sells his stroker for $1000 Drum roll please ............... wiseco hot rod crank for 400-500 bucks almost anywhere I got mine fore 400 trued welded and BRAND new 4mm stroker Quote
fixitrod Posted November 6, 2003 Report Posted November 6, 2003 Chase73, where'd you get the crank? Quote
raxen Posted November 17, 2003 Report Posted November 17, 2003 Tony Doukas Racing, 10-bearing, 350.00 although it is rebuilt, it is the shizit. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.