BansheeEire Posted May 11, 2013 Report Posted May 11, 2013 hey ok so about 3 months ago i was out on shee, keep in mind im from ireland, i was out mudding as it was winter and shee waas running fine brought it home put it in the shed for about a week, then i pressure washed it, then i put it back in the shed took it out for a spin up the road and i was gettin intermitent spark. i took apart my light killswitch and the b/w and b wires were touching? so i removed that killswitch altogether and still intermitent spark, i need to buy a new stator and lightswitch, also my key is bypassed. i dont know but i have a funny feeling that water got inside my stator cover while i was pressure washing as my gromit was shot. btw ive rebuilt my banshee from the ground up thats why im getting to this now so anybody got suggestions. i would really appriciate suggestions! thanks Quote
Surfrjag Posted May 11, 2013 Report Posted May 11, 2013 Have you taken the stator cover off? Is flywheel rusty? Quote
BansheeEire Posted May 11, 2013 Author Report Posted May 11, 2013 yeah the flywheel is rusty..... Quote
Larry's Shee Posted May 11, 2013 Report Posted May 11, 2013 Pull the flywheel with proper puller, not 3 jaw. Clean rust off poles of stator, inside of flywheel, and timing "nubs" on outside of Fwheel. Set pickup gap .018" Quote
Surfrjag Posted May 11, 2013 Report Posted May 11, 2013 Also fix the gromet that let water in. Be sure drain is clear in center of case Quote
BansheeEire Posted May 11, 2013 Author Report Posted May 11, 2013 im buying a new stator, i disassembled the entire engine so the flywheel is off, so if water got on the staor it would give me this bullsh!t? Quote
Surfrjag Posted May 11, 2013 Report Posted May 11, 2013 http://bansheehq.com/forums/index.php?showtopic=165626 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.