Banshee Parts

[quadpro26]

DRAG PARTS:
10mm supercub topend (cyl, piston, head w/domes)  $800

4mm longrod crank  $300

4mm cub topend  $900  (cyl, pistons, head w/domes)

4mm vitos engine (crank, cyl, head w/domes, pistons, cases w/no wack)$1000

7mm crank  $500

poilished cases (no wack) $250

40mm kehin alky carbs $400
Kehin 34PJ carbs $200

Hinson basket w/stock ratio straight cuts $375

(stock ratio) straight cuts w/out basket $240
DMX cylinder (18mm x 85mm bore) ported but not coated $400
18mm crankworks billet crank (big pin/big wheel 133mm rod) $500
custom painted plastics: candy red w/ghost chains and skulls (front, tank, radiator plastics w/cascade grill) $225
alum insert $15
billet handlebar clamp $20
chrome v bars $20

STOCK PARTS:

complete stock ignition $250  (stator, flywheel, harness, coil, cdi, reg)
stock tranny $110
sprocket hub $30
brake hub $15
set lower a-arms $65
spindles (old syle) $30set
set tie-rods (w/ends) $30
radiator $20
complete front brake assy (new style) $50
rear brake lever $25
rear shock $60
rear linkage $20
chrome sm link  $40
foot pegs $20
front hubs w/rotors $30
tank $20
rear 10x9 alum wheels $100
stock rear spring $15
stem mount $5
swingarm sleeve $10
rear brake system polished w/billet rez $125
cases (w/chain break) $125
cases (w/out chain break) $200
clutch cover $20

 

 

[locogato11283]

Hahahaha.

[CrashRyan]

Would you be interested in selling just the stator & flywheel?

[Mitchscheetah]

What ya want for works shocks

[robert0762]

Pm on lockup and cover

[quadpro26]

I'd rather sell the whole ign., pm's returned

 

I have 2 sets of works, the ones pictured need seals and recharged $100

Other set I have are good. $200

[abriana'sbanshee]

Did u have pics for the billet handlebar clamp?

[Starwriter]

 

I have 2 sets of works, the ones pictured need seals and recharged $100

Other set I have are good. $200

 

 

If the $100 Works ressi shocks pictured are about 14 1/2" center to center, I'll take them. PM sent.

[quadpro26]

Works need seals and recharged (oil leaked but worked great til then

[abriana'sbanshee]

Pm for the handlebar clamp with pictures please!!

[quadpro26]

updated. i'll get you a pic

[abriana'sbanshee]

Send pm

[James_21]

Do you have an extra cdi box with the five wires by any chance?

[Racerx812]

Are the cylinders/cranks/pistons new or used? Thank you

[Racerx812]

Are the cylinders/cranks/pistons new or used? Thank you