Bogging

[c.carroll]

What causes my banshee to bog I'm running at Busco hard packed ground I have bolts in tires I had a 14 gear on front went to 15 but didn't help I put more air in tires didn't work I have a override in it but when I leave I dump the clutch and I falls on it's face does anybody have any suggestions thanks

[johstoncounty banshee]

Is the bike low on compression. What are your motor specs?

[n2otoofast4u]

Going from a 14 to a 15 is gonna make it worse! That is gearing it up by quite a bit!

[c.carroll]

I think it's a 421 I am running 110 gas I might need to check the compression and yes that 15 didn't help none lol it has 40mm lectrons on it I played with them some today a little better but still not right

[johstoncounty banshee]

Something is way wrong if its a 421 bogging with just some bolts in the tires. 40 mm carbs are probably way to big for your motor if you are just running race gas. Was it running on alcohol before?

[c.carroll]

No always been on gas I don't think it has enough power

[johstoncounty banshee]

Naw that's definitely not the problem. Something like tune or low on compression more than likely

[10dmbanshee]

Depends on how many bolts and what size they are. We use to race at Busco on the weekends with studded tires but have since moved to the 300ft drags. If the motors up to par it shouldnt bogg.

[10dmbanshee]

Try less air pressure. It will let the tires fold a little bit.

[c.carroll]

Yeah it runs real good after I get off the line I was thinking if I put more air in tires it would make it spin more but I need to try letting some out what kind of compression should it have