AustinONeal Posted March 23, 2013 Report Posted March 23, 2013 Go a 44 lectron and I need to know what to set the metering rod at, because when I received it it was set at 52mm and I was not sure if that is neutral setting for a 250r. set up on alcohol is the same as a banshee as far as 48.5? Thx guys Quote
RadarRacing Posted March 23, 2013 Report Posted March 23, 2013 Austin , I think on the 44mm and the bigger 250rs the neutral/ starting point is like 49.6mms. Flat side of the needle facing reeds/motor of course. If it lean hangs or revvs high then thats lean of course and if its blubbery or blowing alky out on your hand after cleanin it out thats rich. A good snappy sound is what ya want. A little blue color to the smoke rather than white like steam when putting around shows its pretty close to right. Quote
slobanshee Posted September 24, 2013 Report Posted September 24, 2013 Old post I know..... What if the smoke is white like steam? What's that? Quote
trickedcarbine Posted September 24, 2013 Report Posted September 24, 2013 Lean, or...... Coolant. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.