What jets to use

[a.diercks]

I have a completely stock banshee with the mikuni carbs-tors removed- and I have a set of fmf gold series pipes on it. Can anyone tell me what size jets I should be using and what position my needle should be at for elevation of around 1200 ft?

[apeik]

What kinda filters? Airbox, pods?

[maskmanLS6]

ide start with a 270 main and needle in the middle clip. depending on what kind of air filter set up your running.

[bluebanshee98]

temp will def play a role in this. when i had this setup years ago i had 270 mains in the summer with lid off

[a.diercks]

stock air filter and cover on. Right now it has 280's but its idling like shit and fouling plugs. Took plugs out and were soaked

[a.diercks]

Tried putting in 250 with needle in first position and still running rich. Time to keep guessing and tearing into carbs. Damn the fine tuning bs

[sleeper06]

230-240 1 1/2 turns out on screw needle 4th clip from blunt end ,if no jetting works check electrical values you might be chasing your tail

[06BCBANSHEE]

throw 27.5 pilot in.

[srx8525]

go on fmf site it says 260 main 30 pilot clip in 3rd position air screw 1.5 turns out.

 

[dave5.0]

Yank the air box cover off it and get a plate and a filter to put in it. Or screw the stock one to the box so it won't fall out. Then jet it up. Could prob almost get to the 300 main range and pull a bunch more air to go with those pipes.

[dave5.0]

Then read one of the thousand threads on here that tells how to jet carbs and what to look for when its lean or rich.