blakeriley Posted March 3, 2013 Report Posted March 3, 2013 Hi guys im doin a rebuild my first 1 ,im stuck at the steering stem at the top not sure if i lost a part or whats goin on i need few pix of the top of stem where its bolted to the frame,where the clamps are not sure how they go ,any pics would be appreciated thanku Quote
WINDYCITYJOHN400 Posted March 3, 2013 Report Posted March 3, 2013 You have two pieces of hard plastic that act as bushings and mounts at top of the frame. They have 2 small round rubber type rings that insert in the plastic mount to seal junk out of it. Then the metal piece with the cable guides goes on like a big flat washer. Then a bolt on the stator side and the special bolt with a long nut on the end goes on the clutch side and acts as your top radiator mount. Hope I was able to help a little....it all your going to get at this hour. LOL Quote
hoppedupandcutdown Posted March 3, 2013 Report Posted March 3, 2013 Stole this pic off of Ebay, a quick place to find alot a crap. Quote
Starwriter Posted March 4, 2013 Report Posted March 4, 2013 There's also 2 steel pipes that the bolts go through. Quote
KozyHeat Posted March 4, 2013 Report Posted March 4, 2013 Bottom left bolt hole is for the radiator mounting tab. Bendy washer gets sandwiched Here is the back of the steering stem towards the gas tank. Got it figured out then? Quote
blakeriley Posted March 4, 2013 Author Report Posted March 4, 2013 Yep thanks heaps u guys r gr8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.