gomerkfx700 Posted February 23, 2013 Report Posted February 23, 2013 There on there way i got the bear metal with black silencers. I want to leave them bear i like that look but whats the best way to keep them looking good do you wipe them down with motor oil wd40 or what after you was the bike Quote
Nightmare Posted February 23, 2013 Report Posted February 23, 2013 wd-40, just wipe them down real good so shit dont build up on them. Quote
jbooker82 Posted February 23, 2013 Report Posted February 23, 2013 I would lean them up real good then paint them with VHT Flame Proof Clear. Do 2 or 3 light coats. Dont lay it on to thick. Quote
jbooker82 Posted February 23, 2013 Report Posted February 23, 2013 Also make sure your let them dry for a day or two before you install / cure them. Quote
gomerkfx700 Posted February 23, 2013 Author Report Posted February 23, 2013 Something like the clear is what u was thinking Quote
gomerkfx700 Posted February 24, 2013 Author Report Posted February 24, 2013 How does that hold up to the heat have you tried it Quote
jbooker82 Posted February 24, 2013 Report Posted February 24, 2013 I have used VHT Flame Proof clear on my HPI Baja rc exhaust pipes. It held up fine. You want to go with light coats and no runs. If you put it on thick the coating will darken, but it still will be clear. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.