LawDog Posted January 20, 2013 Report Posted January 20, 2013 I'm going to start the rebuild on my banshee. got it last year and rode it a few times. started to hear some lower end noise. i dont know what internal mods its had done. Will find out when i break it open. So my question is after i get done fixing what is wrong id like to just run pump gas. so what size domes should i go with. 20? and if i went to a 4mil would it be okay to have 20 size domes and run pump gas. An what fuel mixture should i go with? i know it verys from person to person. was thinking 20:1 with klotz Quote
Finch Posted January 20, 2013 Report Posted January 20, 2013 32 to 1 on oil is a good common use if ya went 4 mill youd want it ported and domes cut best to talk to a engine builder to get the answers ya looking for. Quote
Pastrykiller Posted January 20, 2013 Report Posted January 20, 2013 20:1 will require more oil per gallon. The price of good oil will definitely run up your price per gallon to run and yield the same results as 32:1. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.