SICRAPTOR Posted December 30, 2012 Report Posted December 30, 2012 Hey everyone, new to the site here. Just recently bought a banshee and I'm in the process of rebuilding it. I've always had 4 strokes and don't know much about the 2 strokes motor wise. The motor i have now is stock but I'd like to give her a little more power and not break the bank. What do you guys suggest? I trail ride and would like to keep it somewhat reliable.....just wanna little bit of an edge over the stock banshee's. Thanks for any help you could give me. Quote
Nightmare Posted December 30, 2012 Report Posted December 30, 2012 Aftermarket pipes if it don't already have them, timing plate, coolhead with domes so u can mess with compression. There's many things u can do for power, porting will definitely up your power. Oh and welcome, lots to learn here. Sent from my SGH-T679 using Tapatalk 2 Quote
trickedcarbine Posted December 30, 2012 Report Posted December 30, 2012 X2 on welding the crank. But cross that bridge on an actual rebuild. There are a lot of bolt on bikes that can make fun bikes. Pipes, reeds, intake, carbs, pod filters, head work or cool head, Quote
SICRAPTOR Posted January 5, 2013 Author Report Posted January 5, 2013 Thanks for the info. Gonna get the cool head and get it ported. Also gonna get the pro flo k&n kit. Got the pipes already. Figure I start there. Thanks again for the help Quote
Finch Posted January 5, 2013 Report Posted January 5, 2013 X2 on welding the crank. But cross that bridge on an actual rebuild. There are a lot of bolt on bikes that can make fun bikes. Pipes, reeds, intake, carbs, pod filters, head work or cool head, Mine only had bolt ons when the crank started letting go.. Quote
04zSpittinKlotz Posted January 7, 2013 Report Posted January 7, 2013 sent you a pm on a pro flow setup sicraptor Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.