Which port job for pro circuit pipes?

[06bluebanshee]

I have PC pipes and VF3 reeds open air box. Which port job do I want to match my pipes? I ride dunes and mx track and trails. Dune port or MX for PC pipes?

Can anyone chime in with info.

 

Thanks!

[Infamous039]

I would say anything from an aggressive dune port and under. You should call a builder and discuss what you have and what your looking for in a motor.

[Surfrjag]

I have an agressive trail port with my pc's. Key is talking to the builder...

[willardwright59]

i had ran them on my stock stroke dune port from HJR and it ripped!! pulled hard everywhere. now that im going to local tracks with buddys to mess around, i built a mx hardcore 4 mil motor and i cut the PC silencers down about 3 inches and run them unpacked. and it ripps even harder!

[mouzon30]

x2 on the mx hardcore by hjr thats what i have and its all power i used the pc headers and the t5 back pipes and it sound bad ass

[blubyyou]

What does cutting the silencers back 3" do? Sorry to hi-jack the thread. Just curious as I also run PC's on my HJR 4 mil dune port. By the way I like the PC's on the motor. Good power all over.

[robert0762]

Hjr hardcore mx port was designed to match the pc pipes . That's what kev told me when I got mine. I love it but the never ending hunger for more has taken over once again. So now I am building a 10 mil super serval.

Edited August 4, 2012 by robert0762

[06bluebanshee]

Thanks Robert! It's a huge power gain over a stock motor tho.. right?

[toytech]

Thanks Robert! It's a huge power gain over a stock motor tho.. right?

 

hard core mx port will be a huge gain over stock.