Exhaust not working

[kenny007]

I finally got my first banshee my first atv as a matter of fact I'll put up a pic tomorrow. It has a problem the right hand pipe doesn't get hot, barely any exhaust comes out, and what looks like fuel begins to drip out. Does anyone have an idea whats going on?

[Phelps]

no compression or no fire

[kenny007]

Very little compression but then it begins to pop and then stops. Do you think it might be a stuck float valve?

[Phelps]

no i think it might be a stuck ring. time for a topend

[kenny007]

That really sucks. I do hear like a fast knocking sound. When I take off it slightly putters but then it takes off and it feels like it's making good power.

[ClayAiken]

Compression it will make more compression while the motor is turning fast enough therefore making the right cylinder fire.

[BrockMoto]

Nows a good time for a port job lol

[dave5.0]

Put plugs in it yet?

[kenny007]

So is every one basically agreeing it's a stuck ring and if so how hard is it to rebuild the top end? My knowledge doesn't really go beyond tune ups and disk brakes.

[kenny007]

Put plugs in it yet?

The spark plugs are new.

[dave5.0]

The spark plugs are new.

 

 

Compression test yet?

[kenny007]

The guy who sold it to me said it was 120 each side. If I test it myself will that tell me if it's a stuck ring?

[BrockMoto]

The guy who sold it to me said it was 120 each side. If I test it myself will that tell me if it's a stuck ring?

 

it will tell you if you need to rebuild or not

[dave5.0]

Wont tell u if it's a stuck ring but it'll tell u if u have compression. If it doesn't have compression doesn't matter what's wrong with it. Still has to come apart. You could always try some engine restore from autozone first.

[kenny007]

I really appreciate your help guys. I even bought carb rebuild kits hoping it was that. How hard is it to rebuild the top end?