banshee A-arms 95-02

[02bansheebrah]

ok so 4th of july was fun until my throttle stuck and shee stood straight up and rolled and it came down on the right front and bent the thin plate holding the ball joint so now i have major positive camber. i ordered a used upper A-arm off of ebay just now and realized it was for a 95, will an 95 a-arm fit on my 02? im pretty sure it will i just want to make sure.

[ginger]

as long as its a A arm bike, and not J arm, (which you are good, J arms were late 80's very early 90's) they will swap.

[NYUK]

90 on all the same.

[bansheesandrider]

90 on all the same.

90 is a J arm bike. A arms came about in 91!

[02bansheebrah]

as long as its a A arm bike, and not J arm, (which you are good, J arms were late 80's very early 90's) they will swap.

 

 

ok so any year A-arm will fit and a-arm bike? and is this a common problem that the stock a-arms fold up like this? it wasent even a bad fall i cant elive it just folded like that.

[ginger]

ok so any year A-arm will fit and a-arm bike? and is this a common problem that the stock a-arms fold up like this? it wasent even a bad fall i cant elive it just folded like that.

not sure i never bent one my one shee i bent the frame the other i have aftermarket arms

[Finch]

ive seen a few bent like that from guys coming down from a wheelie hard.

[badassbanshee479]

89 was the last year of the j arm banshees and yes its a common thing for the upper arms to bend like that..... there are a few companies out there that are modding the stock arms to accept a screw in replaceable ball joint.... hit up wheelman chassis i am sure he can hook ya up if interested...

[bansheesandrider]

89 was the last year of the j arm banshees and yes its a common thing for the upper arms to bend like that.

No, 1990 was the last year for J arms!!!!!!!!!!!! I have owned a brand new 1990 straght off the dealers floor and it had J arms, it was red and white with a blue seat just like 1990s were supposed to be.