Poolman Posted May 10, 2012 Report Posted May 10, 2012 I have made a batch of 6 Leak Down Testers. I ran this Post about a month ago and over 10 of you guy's needed 1. I am running it again for people that did not see this post or need 1 now. All my Leak Down Testers are Home made and 100% accurate. They take me approximately 1 hour to make. They are tested with 15 lbs of air for at least 1 hour. I am selling them for $45.00 / Shipped within the USA. If you live outside the USA I will still ship it to you but you pay shipping. My PayPal is - [email protected] Please send this as a gift so I see $45.00 or add $1.67 which would be a total of $46.67 If you don't send it as a gift PayPal takes out $1.66 for fee's which leaves me short to the tune of $43.34 A Leak Down Test is Invaluable. You must do it at least once to see where your engine stands. Many of you are running huge main jets to compensate for leaks. Save Gas, Fix the leaks, and reduce your main jet size. Of course do your plug chops. I sent out over 10 of these a month ago and everybody got theres. Please include Your Name and Address and they will be in the mail tomorrow and I will send you tracking information. Thanks ! Quote
Poolman Posted May 10, 2012 Author Report Posted May 10, 2012 Ordered mine, can't wait to get it! Already Boxed Brother, I should have asked but I also make an adapter that works with the Leak Down Tester that you just ordered for Bigger Carbs. If you don't plan on getting larger than stock carb's you will be fine with what you ordered. Quote
Infamous039 Posted May 10, 2012 Report Posted May 10, 2012 Sending payment for the adapter piece now. Thanks Quote
Poolman Posted May 10, 2012 Author Report Posted May 10, 2012 Please Read, I have made a change to the Adapter piece to fit larger Carburetors 35mm to 41mm. This new design is much better in my oppionion. I am Happy to say that anyone who ordered in this thread will be getting this new design at the price you already paid. It's much simpler and professional looking. Ok, The Leak Down Tester for stock Carbs has not changed at all and the price will stay the same $45.00 / Shipped if you live in the USA. This is what you will get. The Price for the Adapter Kit is $27.00 if you use the Gift option in PayPal. If you do not use the Gift option Please send $27.99 This will only be of use to you if you already have the Leak Down Tester. This is what you will get. Now, If you don't have anything yet and would like the Leak Down Tester that does stock Carb's and Larger Carbs the cost is $76.00 if you use the PayPal gift option and you live in the USA. If you don't use the gift option Please send $78.81 The whole kit cost's a little more because of shipping. The Box is Bigger, still priority mail though. You will have your Leak Down Tester 3 day's Max. This is what you will get which tests all carbs and is the whole kit and kabudle. Quote
Poolman Posted May 10, 2012 Author Report Posted May 10, 2012 So far this is what is going out today. There is still a couple more hours before the Post Office man get's to my house to pick up these packages. Get your order in now if you want it to go out today. erickson483 ----- 1 Leak Down Tester For Stock OEM Carburetors. infamous -------- 1 Adapter Kit for Larger Carburetors. specialblend07 - 1 Leak Down Tester + Adapter Kit For Larger Carburetors. Quote
bluebanshee98 Posted May 10, 2012 Report Posted May 10, 2012 (edited) i would like to add some feedback about the tester. i was one of the guys who purchased it the first time around. the craftsmanship is top notch. as stated the testers have been tested to hold air. yes you can make your own tester but there is always a chance it is not sealed correctly and will give you a incorrect reading or none at all. i was personally going to make my own at first but saw these. saved time and just bought it. it was a good feeling to know i had a tester that wont fail. its not expensive either. i actually had a air leak without knowing it. i was using huge jets to make my shee run right to compensate for the air leak ( i didn't know i had one). air leaks wont go away or fix themselves and will eventually get so bad that you can easily kill your motor. do you wanna rebuild your precious motor you put all your hard work and $ into due to a damn air leak? i dont think so... so thankyou paul for the great tester! you have saved my motor. i highly recommend getting one of these. its a great tool to have in the shop. you never know where your air leak could be. paul is a great all around guy and has great customer service and fast shipping. i remember when i first got it i wasnt exactly sure how to use it and he personally talked to me on the phone about it. it wasnt early at night either.... 5 stars in my book. straight shooting kind of guy Edited May 10, 2012 by bluebanshee98 Quote
bansheeboie Posted May 10, 2012 Report Posted May 10, 2012 need one of these to fit 34mm keihin pj if u got. pm me Quote
bansheeboie Posted May 10, 2012 Report Posted May 10, 2012 need one of these to fit 34mm keihin pj if u got. pm me Quote
Poolman Posted May 10, 2012 Author Report Posted May 10, 2012 need one of these to fit 34mm keihin pj if u got. pm me The Leak Down Tester that I am selling with the adapter will fit a 34mm Carburetor with no problem. I will correct something that I said earliar about this adapter kit fitting carbs 35mm - 41mm. After getting the Digital Caliper out and checking size of pipe diameter this would fit Carb's 32mm - 41mm. Buy with confidence, My kit will fit 34mm with ease. Quote
Poolman Posted May 10, 2012 Author Report Posted May 10, 2012 i would like to add some feedback about the tester. i was one of the guys who purchased it the first time around. the craftsmanship is top notch. as stated the testers have been tested to hold air. yes you can make your own tester but there is always a chance it is not sealed correctly and will give you a incorrect reading or none at all. i was personally going to make my own at first but saw these. saved time and just bought it. it was a good feeling to know i had a tester that wont fail. its not expensive either. i actually had a air leak without knowing it. i was using huge jets to make my shee run right to compensate for the air leak ( i didn't know i had one). air leaks wont go away or fix themselves and will eventually get so bad that you can easily kill your motor. do you wanna rebuild your precious motor you put all your hard work and $ into due to a damn air leak? i dont think so... so thankyou paul for the great tester! you have saved my motor. i highly recommend getting one of these. its a great tool to have in the shop. you never know where your air leak could be. paul is a great all around guy and has great customer service and fast shipping. i remember when i first got it i wasnt exactly sure how to use it and he personally talked to me on the phone about it. it wasnt early at night either.... 5 stars in my book. straight shooting kind of guy Thanks for the kind words Bluebanshee98. Your first go pro video is very good. http://www.youtube.com/watch?v=MeNNaD7l2n0&feature=uploademail Quote
Poolman Posted May 11, 2012 Author Report Posted May 11, 2012 Brett, Your Adapter Kit will be in the mail tomorrow. You will also get tracking information. Thanks ! Quote
bansheeboie Posted May 11, 2012 Report Posted May 11, 2012 Ok il b sending money out tomoro for tester Quote
bluebanshee98 Posted May 12, 2012 Report Posted May 12, 2012 thank you paul! i dont even have bigger carbs yet and i bought the adaptor. def worth the 27 bucks. it will be very useful in the future when i go bigger Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.