man88 Posted March 16, 2012 Report Posted March 16, 2012 OK i put a Ricky stator in my bike and now it stops firing on one side right before it hits the power band i gaped both nodes to the same .020 is there something I'm over looking Quote
bansheerage Posted March 17, 2012 Report Posted March 17, 2012 Get rid of the ricky stator thats your problem. stock stators are the best stators hands down. Do a search on here. Quote
cline Posted March 19, 2012 Report Posted March 19, 2012 couple years back I put a 200W ricky stator on my bike and it was a piece of shit out of the box. I thought it was going to be a good upgrade because.........long story. Anyway right out of the box it was shit. Shitty solder jobs, the yellow power wire was not even connected to the fitting inside the water proof connector and the yellow coating wasn't even stripped so that the connection was ever possible. Garbage Garbage Garbage. If you have another option you might wanna try that. JMO, Best of luck cuz I chased my tail forever fixing mine. Quote
rdzbangshee Posted March 19, 2012 Report Posted March 19, 2012 could be a stuck rings on the right side i would do a compression check on it rebuild it if you losts ten psi .and i run rickys crap and love it . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.