Jump to content

Recommended Posts

Posted

Bought a 93 Banshee... always wanted one.

 

I'd like suggestions on nerf bars and pipes.

I'm working on jetting, waiting on the TORS eliminator kit.

 

Was somewhat of a basket case when purchased, is running fairly well now, and narrowing down jetting. Working with my selection of jets, it came with 200s (way too lean), 220s (choke pulled 1/2 out runs very well so still lean), tried 310s for fun (no start), the only other option I have in my own stock are 240s (I hope that hits the nail on the head).

 

Bike now has stock pipes, K&N filter with lid and snorkel off. Pretty much bone stock, down to the thumb throttle, engine still has good power, have not done a comp test, didn't feel the need.

 

Forum seems great, although there is NO MEMBER INTRODUCTION SECTION... I wandered around here for quite a while wondering where I was supposed to post. :unsure:

Posted

Welcome to the addiction.

 

First off what type of riding are you using it for? That will help us help you figure out how you want to set ur shee up

Posted

230-240 isprobably gonna be close if its cold out and youve got the k and n lid and no snorkel. however your just going to have to rejet again when you get pipes.....

 

Like stated below....depends what kind of riding your going to be doing to help choose a pipe. there are some pipes that do really well on a ported motor....some on stock motors......some pipes that do great for drag racing and other that do good in tight trails....

Posted

Thanks guys.

 

I'm in Phx, AZ ... Desert riding with the wife and plenty of dune trips to come. I've got an old air cooled 250r trike, as well, that we use for the same purposes too. For now, the engine will stay fairly stock, I may do a cool head later, but nothing outrageous. Just trying to get the thing usable, right now. I don't want a ridiculously loud pipe either, we'll also be taking it camping occasionally. It may just come down to cheap too, I do things right, but I still like them as cheap as possible.

 

So, there's a good range of riding styles there... probably just a good, all around type of set up.

 

My phrasing may have led one to believe the airbox lid is still on... nope, don't even have it. When I went to test the bike it was barely running, so I just did a quick jaunt a few houses up and back. Paid him his G that he wanted, he handed me the airbox with K&N and the mount kit that wasn't even for that filter. :blink:

Posted

And call me stupid... but I can't figure out the shoutbox... am I not allowed to do any shouting yet? I can see it, but don't know where to type. :(

 

From what I saw a veteran member tell another guy that asked your same question about the shout box is that you have to have 15 posts before you can use it.

Posted (edited)

Gawd Dammit!! Where the hell did one of the main jet washers go?? WTF... I wonder if its been missing this whole time I've been tuning. Called 6 stores in Phx and the closest little tiny brass washer is 40 friggen miles away! SumBitch.

Edited by heffay
Posted

If you want an all around pipe that's quiet, i would look into some pro circuits factory sound. A friend of mine had those pipes and they were much much quieter than my toomeys were and they pulled pretty good all the way through.

Posted

Welcome Boss,

 

Check out the forums, grab a few post and shout it up! I have ran CPI and Toomeys on my bikes, friends use PC and they are fairly quiet. I have a 450 that will make you think your at a Hair Band concert.

 

Welcome to the Forum.

 

Adam

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...