From Mild TO Wild! Posted January 25, 2012 Report Posted January 25, 2012 TORS were removed by previous owner. I want my on off switch to work. My only way to turn the quad off is the key. Any ideas to solving my problem? Quote
fastbanshee8 Posted January 25, 2012 Report Posted January 25, 2012 Follow the wires from the kill switch, to the underside of the gas tank, and see if one of them is unplugged. Quote
shakar Posted January 25, 2012 Report Posted January 25, 2012 holly badluck man...you finally get it run and now you cant get it to stop. it can be a head ache when 1 thing after another goes. goodluck Quote
Surfrjag Posted January 25, 2012 Report Posted January 25, 2012 also clean the conection inside the offswitch itself. its either something in the switch or a bad ground. Quote
wfobasheeboy Posted January 25, 2012 Report Posted January 25, 2012 also clean the conection inside the offswitch itself. its either something in the switch or a bad ground. ^^^^X2^^^^^ Quote
From Mild TO Wild! Posted January 26, 2012 Author Report Posted January 26, 2012 There was a bunch of sand in the switch. It was connected below the tank and the connection there was fine. Im testing it tomorrow. Quote
tarmacsti Posted January 26, 2012 Report Posted January 26, 2012 (edited) I tore my switch apart and found that the little spring pushing the ball was broken. Replaced the spring and it works fine now.. Edited January 26, 2012 by tarmacsti Quote
Broke_Banshee Posted January 26, 2012 Report Posted January 26, 2012 (edited) i had a wire popped off mine,soldered it back on and all good Edited January 26, 2012 by Broke_Banshee Quote
From Mild TO Wild! Posted January 27, 2012 Author Report Posted January 27, 2012 It was just the dirty sand covered connections in the switch on the bars. Its now safe to ride. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.