CruelSoul Posted January 9, 2012 Report Posted January 9, 2012 Just got a almost new carrier off my buddy already has a grease fitting on it mine just went back after the rebuild 2nd day I got everything done on here it decides to go so figured I would replace it ASAP well I have never done one of these this will be my first one looking around for any info on doing one did not see any videos on how to on youtube so can someone here help me out and give me a few tips aswell on getting this off and putting it back together thanks alot. Quote
Larry's Shee Posted January 9, 2012 Report Posted January 9, 2012 Another example of why we use manuals. Remove lock nuts, left wheel hub, sprocket hub. If it doesnt slide out after that, good luck. Get creative 'cause sleeve is rusted to axle. Quote
CruelSoul Posted January 9, 2012 Author Report Posted January 9, 2012 Also another reason why this forums here and this section Quote
Larry's Shee Posted January 9, 2012 Report Posted January 9, 2012 (edited) And in this age of entitlement you'll also notice I gave a brief explination how to do it Edited January 9, 2012 by Larry's Shee Quote
CruelSoul Posted January 9, 2012 Author Report Posted January 9, 2012 Well thanks but the brief that you gave me was already taken into consideration just need to know other specific problems I can run into and if I am possibly going to have to pound out the axle from the carrier etc.. Quote
Larry's Shee Posted January 9, 2012 Report Posted January 9, 2012 If the axle is stuck, double nut the end , not with castle nuts, grab the carrier and slam axle against block of wood, or maybe whack it with hammer, or rig up a puller. Worse case take it to an auto parts/machine shop and have it pressed out. I have a blaster axle that I couldn't get sprocket hub off with a puller and heating it cherry red. Quote
midlifecrisis Posted January 9, 2012 Report Posted January 9, 2012 Dude, use a little bit of grammar in your post, I dont know about the other guys, but I thought you were trying to install a grease zerk in your carrier? Are you trying to do this, or replace your axle in your stock carrier? Lets start with this info first. Quote
CruelSoul Posted January 9, 2012 Author Report Posted January 9, 2012 (edited) I just want to know how hard is it to change the fking carrier I could not find any info on youtube or on the search here so I made this post. Edited January 9, 2012 by CruelSoul Quote
Larry's Shee Posted January 10, 2012 Report Posted January 10, 2012 http://www.mediafire.com/?oiz8lyqrw27rxlo Don't get me started down this road, Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.