voodoo69 Posted December 15, 2011 Report Posted December 15, 2011 do you all thank a stock frame with a 6+ swing arm can handle a 10 mill 465cc cub on race gas built buy redline raceing Quote
Dicklez Posted December 15, 2011 Report Posted December 15, 2011 do you all thank a stock frame with a 6+ swing arm can handle a 10 mill 465cc cub on race gas built buy redline raceing No problem. Quote
Phelps Posted December 15, 2011 Report Posted December 15, 2011 you can't, not on a +6 but the frame can.... Quote
voodoo69 Posted December 15, 2011 Author Report Posted December 15, 2011 you can't, not on a +6 but the frame can.... how long of a swing arm should i run if i want to dune a little bit Quote
STINKYDELUXE Posted December 15, 2011 Report Posted December 15, 2011 (edited) you can run a 6" swinger on race gas. the one in my sig is a 521 that being said I would not even think about it on Meth Edited December 15, 2011 by STINKYDELUXE Quote
BigRed350x Posted December 16, 2011 Report Posted December 16, 2011 A +6 will be fun with that setup. If you run it on methanol and are putting a lot of power to the ground you will probably want a longer swingarm though. The frame will handle it no problem. Quote
locogato11283 Posted December 16, 2011 Report Posted December 16, 2011 10mm Cub on gas with +6 arm. You should have no issues.. Quote
BigRed350x Posted December 17, 2011 Report Posted December 17, 2011 (edited) 10mm Cub on gas with +6 arm. You should have no issues.. Gas = Dirt = +6 = Methanol = Sand = +6 = Gas = Sand = +6 = Not sure why you'd try that last one... lol Edited December 17, 2011 by BigRed350x Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.