coolant coming out of where headers mount to cylinder..Help

[bansheerilla]

Can't figure out why I have coolant coming out where the headermeets the cylinder?

[SNTBANSHEE]

If your talking about the exhaust port then its probably time for a new head gasket. Does it put out alot of white smoke?

[Finch]

Can't figure out why I have coolant coming out where the headermeets the cylinder?

New gasket time

[Infamous039]

Yes new gasket and also check to make sure there is no damage to the head.

[Jereme6655]

okay....that could be how to fix the part. But the real question is why did the problem start. Did you do anything to your bike recently like pulling the head off or did you change anything or run it out of fuel? any recent motor mods?

[bansheerilla]

Sorry guys didt give any info....fresh rebuild with dune port job with cool head,timing plate adj,34 carbs,t5exhaust.

[bansheerilla]

Just took off head and orings under domes look just a little flat on one side but not really, not sure if I'm going in the right direction.

[Finch]

Just took off head and orings under domes look just a little flat on one side but not really, not sure if I'm going in the right direction.

 

ya even if theres a lil pinch in those o rings theyll leak

[bansheerilla]

thanks will change orings and see. good looking out.

[AKheathen]

just to clarify, it's actually coming out of the exhaust port? or is it coming from the bottom of the cylinfers, between the clyinders, or somewhere else? it helps to use a mirror, and check to see exactly where it comes out. could be the coolant line that drops off the head to the clutch cover, or could be coming from a bolt hole, or could have left out the plugs that go in the bottom of the cylinders, or, if you put a head gasket in there, then take it out.