sand gearing

[530grafix]

So is it better to have as big as possible front sprocket and gear down withthe back or vise versa or does it really even matter?

[okbeast]

I never really thought it mattered. Final drive ratio is final drive ratio. Someone else might have a differing opinion.

[06specialedition]

What size tires you running?

[530grafix]

22-11-8

[RadarRacing]

I like to have a larger front sprocket . With a 12 or 13 tooth front sprocket the chain has to make a much sharper bend to go around the sprocket. I like to run a 15 or 16 tooth front but with a 14 tooth front sprockets are easier to get.

[wesw]

Run the highest gears u can launch in whatever gear u start with Without a bog

[BUILDER]

One reason to run a bigger front sprocket is for better chain life but other than that no not really any reason to go big front or rear

[530grafix]

Ty all.

[scorpo04]

Final drive ratio is not the same changing sprockets... your trans gear ratio stays the same but the larger the driven the sharper the acells and lower top speed... vise versa goin up on the drive sporcket adds more top end and will ultimately rob acceleration...

[possum]

I found best running 16 41 ported 350 with 74 rollout 12 paddles.

[585 twister]

I found best running 16 41 ported 350 with 74 rollout 12 paddles.

You must have stock trans and starting off in first

[RiDeTRIKES250R]

You must have stock trans and starting off in first

 

14/38

 

depends alot on your engine and tires...

 

 

i run 15/38 on anything above 485.

[possum]

Yes sir.. Have gotten fastest times and mph up olds 1 thru 3. The gearing makes everything taller and pulls way harder with less hp. I walk alot of bikes i shouldnt..