What to do to make my Shee charge a 12v battery?

[1sick6]

As the topic states I just wana make my Shee keep charge in a battery so I can run a small thermo fan.

 

Any info would be great thank you, Paul.

[Glenyboy]

You need to do a dc conversion as your bike is ac, there are threads in the search section.

[chugger]

Are you running lights if not you can use the lighting coil to charge a battery all you need is a suzuki lt80 rectifier

thats what i am doing to charge my 12volt battery for my nitrous solenoids on my drag bike

[1sick6]

Cheers for that chugger, I'm not running lights it's just for my flat track bike. Where about do I need to plug that rectifier in to my wiring loom?

 

Cheers, Paul

[BigRed350x]

Float the ground on your stator, get a rectifier and the battery & wire it all up. There's a couple walk-through's here on HQ.

[wfobasheeboy]

Here is a wiring for light just put a fan in place of the lights. ( float the ground)

 

http://img853.imageshack.us/img853/482/bansheewiringmotorcycle.jpg

[chugger]

you can float the ground as well there are a few ways to do it

 

take the wire that goes from the stator to the rectifier plug that wire into the lt80 rectifier and take the other wire from the lt80 rectifier and run that to the positive batt post. ground the rect very good ground the battery very good to the frame and ground the motor very good to the chassis as well and you are good to go.

 

everytime the bike is running its charging the battery

 

works like a champ for me the lt80 rect is like 45-55 dollars.

[1sick6]

What does float the ground mean?

[wfobasheeboy]

What does float the ground mean?

 

Here you go. I think this will help you out.

http://www.trailtech.net/media/instructions/lights/stators/AC-DC_Banshee_Stator_Conversion_Instructions.pdf