ham354 Posted September 22, 2011 Report Posted September 22, 2011 Im looking to buy a 4mil long rod but im unsure where to get one from. Here are my options -f.a.s.t hot rod crank w/ extra weld -m&m crank with max load bearing -rdz crank Quote
BigRed350x Posted September 22, 2011 Report Posted September 22, 2011 Give kevin at HJR a call. He has some good cranks as well. The life of your crank is directly related to the install, checkout, and maintenance of the crank. Check your crank with a dial gauge once you have it in your cases and have them torq'd up. Make sure the crank is still spinning true. That's a good start. - Jared Quote
Larry's Shee Posted September 22, 2011 Report Posted September 22, 2011 Give kevin at HJR a call. He has some good cranks as well. The life of your crank is directly related to the install, checkout, and maintenance of the crank. Check your crank with a dial gauge once you have it in your cases and have them torq'd up. Make sure the crank is still spinning true. That's a good start. - Jared And what do you do if runout is off, and it's a welded crank Quote
BigRed350x Posted September 23, 2011 Report Posted September 23, 2011 And what do you do if runout is off, and it's a welded crank If you've already been running it, send it off for a rebuild. If its a new crank send it back for a replacement. Quote
camatv Posted September 23, 2011 Report Posted September 23, 2011 what the diff in an HJR crank? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.